Scart Female to BNC adapter

This is a EURO Female Scart to 4 BNC + audio adapter used to connect devices that output RGB via a SCART connector to a monitor/TV or other equipment that only has BNC jacks such as professional video monitors (SONY, JVC, OLYMPUS, IKEGAMI Panasonic etc.)

Specs:

• 50cm (1.6ft.) in length
• 75ohm BNC connectors
• Shielded Video & Audio (MONO or STEREO) lines
• EU made, good quality Scart female connector
• in Mono audio option, LEFT/Right channels are safely combined together into a single mono signal using a passive summing circuit with two resistors to prevent damage to your equipment. This option is recommended if you are using the monitor's single speaker
• in Stereo audio option, the two RCA (left/right) leads will be 1 meter (3ft.) long coming of the scart connector
• The Sync Stripper option for clean sync signal is recommended only:
  1. if you use low quality cables
  2. you are using cables wired for sync on composite or sync on luma and desire a cleaner signal
  3. your equipment (PVM/BVM or EXTRON device) specifically requires CSync signal
  4. Don't chose this option if your cables have a built in sync stripper as that can cause problems
  5. In order for the sync stripper circuit to work your cables should have +5V, +12V from pin 8 of the scart cable as that powers the circuit. Properly built cables have this pin connected on the scart plug
• All cables are handbuild in Albania